-Draper 01817 Storm Force 150mm Dual Action Polisher (900W)
-Menzerna Heavy Cut Compound 400
-Menzerna Final Finish SF3800
-Menzerna Heavy Cut Foam Pad, Hard, Red
-Menzerna Finish Foam Pad, Green
Draper 01817 Storm Force 150mm Dual Action Polisher (900W)
-Variable Speed Control
-Adjustable handle
-Backing plate
-5 meter cable
Menzerna Heavy Cut Compound 400 contains even more ultra fine abrasive so can now remove sanding marks up to 1200 grit whilst at the same time producing exceptional levels of gloss. We have found this to be a truly exceptional product when used by either Dual Action or Rotary polisher, quickly removing swirls and scratches even on tough paints leaving a truly exceptional level of gloss for such a correction compound.
Like all products from Menzerna Heavy Cut 400 is free of silicone and fillers so therefore results are permanent.
- More cut: Elimination of sanding marks of grit 1200 ultra fast
- High gloss: Within one-step process creation of impeccable high gloss
- One-step polish: Saving time due to one-step process with high abrasiveness and high gloss
- All-purpose: Suitable for all types of clear coats
Technical Specification:
-Water based
-Suitable for use with DA, rotary or by hand
-Suitable for all types of paint finish
-Contains diminishing abrasive particles
-Free of silicones and fillers
-Cut: 8/10
-Gloss: 8/10
Menzerna Final Finish SF3800 (PO85RD) can be used by random orbial or rotary polishing machines and even by hand. For best results we reccommend using this in conjunction with a fine finishing pad.
-Professional grade polish that will deliver stunning results.
-Bodyshop safe formula contains no fillers, silicones, waxes or glazes.
-Easy to apply and remove with less dust.
-Cut: 2/10
-Gloss: 10/10
Directions for use:
-Ensure surface is clean, dry & cool to the touch
-Apply 2-3 pea sized amounts to a medium/heavy polishing pad or lambswool pad depending on the requirements of the job
-Place pad against paintwork & work at low speeds to spread compound
-Work abrasives at medium speed (3-4 with a DA, 2-3 with a rotary)
-Wipe residue with Soft microfibre towel
-Finish can be checked using Menzerna Control Cleaner to remove all residue is removed