Novol Polyester Spray Filler, 1.2kg, Supplied With 80ml Thinners & 50ml Hardener

€24.99

Temporarily out of stock

Item code: 3304673

Sign-Up Discount!

Specifications

Application:

spray filler

Pack Size::

1.2kg

Set Contains:

Hardener x 50ml

Set Contains:

polyester spray filler x 1.2kg

Set Contains:

Thinner x 80ml

OE Number

N1201

N1201

Overview

Novol Polyester Spray Filler, 1.2kg, Supplied With 80ml Thinners & 50ml Hardener

Novol 1201 Polyester Spray Filler Kit (1.2kg) – High-Build Surface Perfection

The Novol 1201 Polyester Spray Filler is a professional-grade, two-component (2K) sprayable putty designed to provide an exceptionally smooth, high-build foundation for automotive paintwork. This comprehensive kit includes 1.2kg of filler, 50ml of hardener, and 80ml of Thin 880 thinner, giving you everything needed to achieve a flawless surface on large areas or complex shapes.

It is specifically engineered to fill deep sanding marks, minor irregularities, and "pinholes" that traditional spreadable putties might miss, significantly reducing the manual labor required for block sanding.

Key Features & Benefits

High Filling Power: Capable of being applied in thick layers to level out large, uneven surfaces quickly.
Perfect Atomization: When mixed with the included Thin 880, the filler flows easily through high-build spray guns for a uniform, flat finish.
Excellent Sanding Properties: Once cured, it sands effortlessly without clogging paper, allowing for sharp body lines and perfect contours.
Isolating Properties: Acts as a stable barrier, preventing "mapping" or "ringing" of repair areas in the final topcoat.
Superior Adhesion: Bonds firmly to polyester fillers, steel, aluminum, and glass-reinforced plastics (GRP).

Professional Application Strategy

The Novol 1201 Spray Filler is best applied using a spray gun with a large nozzle (typically 2.0mm to 2.5mm).

Application Steps:

Preparation: Clean and degrease the surface. Sand with P180–P240 grit.
Mixing: Mix the filler and hardener thoroughly. Only then add the thinner to reach the desired spray consistency.
Layers: Apply 2 to 3 layers, allowing for a 5–10 minute flash-off between coats.
Sanding: Once fully cured, begin dry sanding with P180–P240 and finish with P320 before moving to primer.

Important Note: Spray filler is porous by nature. It must always be sealed with an acrylic primer (like Novol Protect 330/390) before applying your final basecoat or topcoat to prevent moisture absorption and ensure paint adhesion.

Incorrect or missing product information? Let us know

Hazards & Warnings

Causes skin irritation. May cause an allergic skin reaction. Causes serious eye damage. Use PPE, handle with care and keep out of reach of children and pets.