Novol Thin 860 Epoxy Thinner (1L) – Optimized Flow for Epoxy Primers
Ensure your anti-corrosive coatings are applied with professional precision using Novol Thin 860. This 1-litre thinner is specifically formulated to work with Novol Epoxy Primers (such as the 2K Protect 360).
By thinning your epoxy primer with the correct solvent, you improve atomization and flow, resulting in a smoother surface that requires less sanding and provides a superior base for subsequent layers.
Key Features & Benefits
- Targeted Compatibility: Specifically engineered for Novol Epoxy Primers, ensuring a stable chemical reaction without compromising the primer's anti-corrosive properties.
- Enhanced Leveling: Reduces the viscosity of thick epoxy coatings to allow for a flatter, more uniform application.
- Improved Sprayability: Helps prevent "dry spray" and orange peel, particularly when using smaller nozzle sizes or spraying in warmer conditions.
- Pure Formulation: Contains no recycled solvents, preventing issues like "blooming" or adhesion failure.
- Controlled Flash-off: Designed to evaporate at a rate that allows the epoxy to settle and bond effectively to the substrate.
Professional Mixing Advice
When thinning epoxy, precision is vital. For Novol Protect 360, the thinner is typically added after the hardener has been thoroughly mixed into the base.
Mixing Guide:
- Combine Base & Hardener: Mix at the specified ratio (e.g., 1:1 or 4:1 depending on the specific product).
- Add Thin 860: Add the thinner (usually 10% to 25% by volume) to reach the desired spray viscosity.
- Induction Time: Some epoxy systems benefit from a short "rest" period after mixing but before thinning—always check your specific primer's Technical Data Sheet (TDS).
Expert Insight: Using a universal thinner in epoxy can often lead to "solvent trap" or a soft cure. Using Thin 860 guarantees that the chemical bond of the epoxy remains intact, providing the best possible rust protection for your vehicle.
