Novol N91563 N-Range Mega Clear 8600 (1.0 Litre) - Crystal Air-Drying High Solids (HS) 2:1 Clearcoat
The Novol N91563 Mega Clear 8600 is a revolutionary "Rapid-Dry" High Solids clearcoat from the premium N-Range series. Engineered for maximum efficiency, this 1.0-litre unit utilizes advanced resin technology that allows the coating to cure through atmospheric humidity and air exposure at incredible speeds.
It is specifically designed for shops and restorers looking to bypass the spray booth bake cycle. Mega Clear 8600 reaches polishing hardness in record time without the need for infrared lamps or oven heating, making it the ultimate "energy-saving" clearcoat.
Key Features & Benefits
- Ultra-Fast Air Drying: Reaches "dust-free" status in minutes and is ready for assembly or polishing in approximately 60–90 minutes at 20°C.
- Crystal Clarity: Offers a "water-white" transparent finish that does not distort colors, making it perfect for bright whites, silver metallics, and vibrant custom paints.
- Energy Efficient: Eliminates the need for expensive booth baking cycles (60°C), significantly reducing utility costs and increasing vehicle turnaround.
- Superior Gloss & Depth: Despite its rapid dry time, it maintains a deep, mirror-like gloss that does not "sink" or "die back" as it cures.
- Excellent Hardness: Once fully cured, it provides a "Mega" tough surface resistant to scratches, stone chips, and environmental contaminants.
- Easy Polishing: The unique resin structure allows for effortless flatting and polishing shortly after application, with no "sticky" residue.
Professional Application Guidelines
- The 2:1 Ratio: This 1.0L clearcoat must be mixed with 500ml of Novol 90860 Hardener. Because this is an air-drying system, the ratio is critical; do not attempt to use standard N-Range hardeners.
- Application: Apply two full coats with a 5-minute flash-off between them. Because it dries so fast, ensure your spray booth has good airflow to carry away solvent vapors.
- No Thinning Required: Usually applied ready-to-spray once mixed with the 90860 hardener. If the temperature is very high (above 25°C), a tiny addition (5%) of Novol N65511 Thinner can help maintain the "wet edge."
- Short Pot Life: Note the shorter pot life of ~1 hour. Only mix what you intend to spray immediately. Do not leave mixed product in the gun.
Why Choose Mega Clear 8600?
In a busy environment, the "bottle-neck" is usually the drying time. The Novol Mega Clear 8600 turns a standard garage into a high-production zone. It is the perfect choice for "Same Day" repairs or for restorers working in environments without access to a heated low-bake oven. You get the hardness of a baked finish with the ease of an air-dry product.
