Novol 91132 N-Range Superb Clear 8100 – High Solids (HS) 2+1 Clearcoat, 1.0 Litre
The Novol 91132 Superb Clear 8100 is the pinnacle of the professional N-Range series. This 1.0-litre High Solids (HS) clearcoat is engineered for technicians who demand a "superb" factory-standard finish with maximum durability. Designed for both spot repairs and complete resprays, it offers an incredible depth of gloss and a robust protective layer that rivals premium OEM coatings.
As a 2+1 system, it provides a higher resin-to-solvent ratio than standard 3:1 clears, resulting in a thicker, more resilient film with fewer passes.
Key Features & Benefits
- Ultra-High Gloss Retention: Delivers a crystal-clear, deep mirror finish that does not "die back" or lose its luster after the curing process.
- Superior Scratch & Chemical Resistance: Formulated to withstand the rigors of modern driving, including car washes, road salt, bird droppings, and industrial fallout.
- Exceptional Flow and Leveling: Despite its high solids content, the 8100 levels out beautifully, significantly reducing "orange peel" and the need for extensive flatting and polishing.
- Rapid Hardening: Engineered for a fast "through-cure," allowing for quicker assembly of vehicle parts and faster turnaround times in the booth.
- Advanced UV Filtration: Contains premium light stabilizers to ensure the underlying color remains vibrant and the clearcoat stays transparent for years without yellowing.
- High Efficiency: The 2+1 mixing ratio provides a higher "build" per coat, meaning you achieve the desired thickness (typically 50-60 microns) in just 1.5 to 2 coats.
Professional Application Guidelines
- The 2:1 Mix: To achieve the intended chemical performance, you must mix this 1.0L clearcoat with 500ml of Novol 90800 Hardener.
- Measuring: Use the Novol N-Range 2:1 Measuring Stick. Precision is vital; incorrect ratios in HS clears can lead to a brittle finish or a coat that never fully hardens.
- Application: Apply one half-coat (a light closed coat) followed by one full wet coat. Allow a 5–10 minute flash-off between coats, or until the surface is "stringy" to the touch but not yet dry.
- Curing: While it air-dries effectively at 20°C (ready to handle in ~6-8 hours), it reaches its "Superb" hardness much faster with a low-bake cycle (60°C for 30 mins) or IR heating.
Why Choose Superb Clear 8100?
The N-Range is Novol's "no-compromise" line. While other clearcoats might be easier on the wallet, the 8100 is designed for the high-end enthusiast or professional shop where the quality of the finish is the absolute priority. If you are painting a dark metallic or a premium restoration project, this clearcoat provides the clarity and "heft" needed to make the paintwork pop.
