Novol N90040 Classic Polycoat Protect – Satin Black, 1.0 Litre (5:1)
The Novol N90040 Classic Polycoat Protect is a professional-grade, two-component (2K) protective coating designed for surfaces exposed to extreme mechanical and environmental stress. This 1.0-litre unit delivers a rugged, Satin Black finish that combines high-build anticorrosive properties with an ultra-tough, scratch-resistant surface.
Whether you are coating a 4x4 chassis, truck bed, or industrial machinery, Polycoat Protect provides a "shield-like" barrier that is far superior to standard chassis paints or underseals.
Key Features & Benefits
- Extreme Mechanical Resistance: Formulated to withstand heavy impacts, stone chips, and abrasions - perfect for off-road vehicles and utility workhorses.
- Superior Anticorrosive Barrier: Actively seals out moisture, road salt, and chemicals to prevent rust from forming on the substrate.
- Satin Black Aesthetic: Dries to a deep, uniform satin black that looks factory-original and hides surface imperfections better than high-gloss coatings.
- UV & Weather Stable: Unlike bitumen-based products, Polycoat Protect will not "chalk," fade, or crack when exposed to prolonged sunlight and temperature fluctuations.
- Adjustable Texture: Depending on your spray gun settings, you can achieve anything from a smooth, industrial semi-matte finish to a heavy, "stippled" raptor-style texture.
- High Build Formula: Allows for a thick application in fewer coats, providing structural reinforcement to the panel.
Professional Application Tips
- The Perfect Ratio: Use the Novol N39699 (4:1 / 5:1) Measuring Stick. An exact 5:1 mix is critical for the coating to reach its laboratory-tested hardness.
- Texture Control:
- For Heavy Texture: Use a Novol 39999 Schutz Gun at 3–4 bar pressure.
- For Fine Texture: Increase pressure to 5–6 bar or use a gravity-feed gun with a large nozzle (2.0mm–2.5mm).
- Surface Prep: Sand the substrate with P180–P240 and degrease thoroughly with Novol N65503 Silicone Remover. For maximum longevity on bare metal, apply a coat of Classic Epoxy Primer first.
- Flash-off: Allow 10–15 minutes between coats to ensure solvents escape, preventing "solvent pop" in the thick film.
Why Choose Novol Polycoat Protect?
Standard "chassis paints" often peel or chip off after one winter. Novol N90040 is a structural coating that bonds chemically to the surface. Its Satin Black finish is not just for looks; it is an industrial-strength polyurethane/acrylic hybrid that keeps your vehicle protected against the harshest road conditions.
