Novol 310003330 Cobra Truck Bed Liner – Multi-Purpose Protective Coating (Clear, 600ml)
Protect your vehicle with the extreme durability of Novol Cobra. This 600ml unit is a high-performance, 2K polyurethane textured coating designed to provide a "bulletproof" shield against mechanical damage, chemicals, and harsh environmental conditions.
The Clear version is the ultimate "chameleon" coating. It can be mixed with any solvent-based basecoat (10–15% by weight) to create a custom-colored, textured finish that perfectly matches your vehicle’s paint code.
The Power Mix: 3:1 Ratio
This is a professional 2K system that requires the specific N310003334 200ml Hardener to achieve its legendary hardness.
- Mixing Ratio: 3:1 (3 parts Cobra : 1 part Hardener).
- Yield: Mixing this 600ml bottle with the 200ml hardener creates 800ml of ready-to-spray coating.
- Custom Color: To tint, add 50ml to 100ml of a solvent-borne basecoat (e.g., Novol Spectral) into the 600ml bottle before adding the hardener.
Key Features & Benefits
- Extreme Mechanical Resistance: Specifically engineered to resist scratching, impact, and abrasion—ideal for truck beds, off-road 4x4s, and agricultural equipment.
- Anti-Corrosive Barrier: Creates a thick, waterproof seal that prevents rust and oxidation on properly prepared substrates.
- Texture Control: By adjusting air pressure and the distance of the spray gun (typically a Schutz/Underseal gun), you can achieve anything from a fine "leather" grain to a heavy "rugged" texture.
- Sound Deadening: The thick polyurethane layer significantly reduces road noise and vibrations in large metal panels.
- UV Stability: Formulated to resist yellowing and "chalking," ensuring your custom color stays vibrant even under intense sunlight.
Professional Application Strategy
Cobra is incredibly versatile but requires specific tools for the best look:
- Preparation: Clean with Novol Plus 780. Sand the surface with P120–P180. For maximum longevity, apply over Novol Protect 360 Epoxy Primer.
- Mixing: The 600ml bottle has extra "headroom" specifically so you can pour the hardener directly into the bottle, shake it vigorously for 2 minutes, and screw it onto the spray gun.
- The Gun: Use a UBS/Schutz Spray Gun.
- Standard Texture: 3.0 – 4.0 bar pressure.
- Fine Texture: Use a standard gravity spray gun with a large nozzle (2.0mm+) at 2.0 bar.
- Coats: Apply 2 layers. Allow 15–20 minutes of flash-off time between coats.
Expert Insight: Cobra Clear is the secret to a high-end "OEM" finish on plastic trim. If you tint it with a "Bumper Grey" basecoat, it creates a much more durable and professional finish than standard aerosol bumper paints.
