Novol 1180 One-Component Acrylic Putty (100ml) – Precision Finishing for Micro-Defects
Achieve a mirror-smooth surface with Novol 1K Acrylic Putty, a professional-grade single-component finishing filler designed for the finest automotive repairs. This 100ml tube is the ultimate solution for eliminating microscopic surface imperfections, pinholes, and minor scratches that traditional 2K fillers might miss.
Unlike two-component putties, this 1K formula requires no hardener, making it ready to use straight from the tube for quick touch-ups and final detailing before priming.
Key Features & Benefits:
- Ready-to-Use Formula: No mixing or hardener required - simply squeeze and apply, saving time on small-scale repairs.
- Ultra-Fine Texture: Designed to fill tiny "pinholes" and sanding marks (P400 - P600) for a flawless paint foundation.
- Superb Sanding Properties: Dries to a crisp finish that sands effortlessly, preventing "clogging" of fine-grit sandpapers.
- Excellent Adhesion: Bonds securely to cured 2K fillers, primers, and old paint coatings.
- Minimal Shrinkage: High-quality acrylic resins ensure the putty stays level as it dries, preventing "mapping" after the topcoat is applied.
- Compact 100ml Tube: The perfect size for "Smart Repairs" and detailing kits, ensuring the product stays fresh for every use.
Professional Application Strategy
Novol One-Component Acryl Putty is a "finishing" product and should be applied in very thin layers (max 0.1mm to 0.2mm). It is not intended for structural repair or deep filling.
Application Steps:
- Prep: Ensure the surface is clean, dry, degreased, and sanded with a fine abrasive (P400 or finer).
- Apply: Use a stainless steel or plastic spreader to apply a paper-thin layer over the defect.
- Dry: Allow to air-dry for approximately 20 minutes.
- Sand: Wet or dry sand with P600 - P1000 grit for a perfectly smooth transition.
Expert Insight: Because this is a 1K product that dries by solvent evaporation, avoid applying it in thick coats. For deeper dents, always use a Novol 2K Polyester Putty first, then use this 1K putty as your final "glaze" for perfection.
