1K one-component acrylic putty is a finishing putty.
Its main purpose is to fill very small scratches and surface defects directly before coating. The product is coatable with all acrylic and base products. Hence it must be applied in very thin layers and left for the solvent to flash off between the successive putty layers and sanded with the same abrasive papers as acrylic fillers.
Application directions
-Clean and sand the surface.
-Degrease the surface with PLUS 780
-Apply in thin layers. Always apply a thin layer first to fill small holes and scratches.
-Wait 15-30 minutes between successive layers of putty. The flash off time depends on the temperature and the layer thickness
-Wait for 25-35 minutes (at 20*C) or 10 minutes (at 60*C)
-Manually or Machine dry sand with P280-P400 Abrasive paper.
-Manually or Machine wet sand with P400-P800 Abrasive paper.
