Restore unsightly curb damage, scuffs, and wheel scratches to a factory-fresh finish with the AMiO 02834 DIY Alloy Wheel Repair Kit. Specially developed for car owners, vehicle detailers, and body shop touch-ups, this all-in-one rim restoration set permanently repairs kerb rash, gutter gouges, tyre-mounting scratches, minor dents, and stone abrasion without requiring wheel removal or costly specialist refurbishment.
The kit pairs a high-strength two-component epoxy repair compound with dedicated sanding tools and a high-adhesion metallic silver wheel lacquer. The moldable epoxy filler bonds securely into gouged aluminum or steel, curing into a dense, sandable foundation that can be shaped flush with the original rim profile. Once contoured, the matching silver paint seamlessly blends the repair into the wheel’s factory finish, providing long-lasting resistance against brake dust, high-pressure washers, heat, and winter road salt.
Key Features & Benefits
- Permanent Kerb Rash Repair: Deeply fills and conceals rough curb rash, gouges, edge scuffs, and chipped wheel lips on modern alloy rims.
- High-Strength 2-Part Epoxy Filler: Creates a rock-solid, vibration-resistant bond that cures in 15 minutes, allowing you to sand, shape, and feather the repair flush with the surrounding rim.
- Metallic Silver Touch-Up Paint: Formulated with metallic flake pigment to match standard OEM and aftermarket silver-painted alloy wheels.
- Universal Wheel Compatibility: Suitable for all aluminum alloy wheels, synthetic wheel faces, steel rims, and painted plastic hubcaps.
- Massive Cost Savings: Eliminates the hundreds of pounds or euros charged by professional mobile wheel repair services or powder-coating shops.
- Complete DIY Solution: Comes supplied with all essential tools - including sanding pads, application spatulas, detail brushes, cleaning wipes, and protective gloves.
- Weather & Chemical Resistant: Engineered to withstand harsh road grit, de-icing salts, wheel acids, pressure-washer jets, and brake-caliper heat after full cure.
Simple 6-Step Application Guide
- Clean & Prep: Clean all road grime and brake dust from the damaged area. Use coarse sandpaper to remove loose metal burrs, flakes, and sharp edges around the kerb rash.
- Degrease: Wipe the repair area thoroughly using the included alcohol cleaning pad to ensure maximum filler adhesion.
- Mix Compound: Dispense equal parts of the two-component repair glue onto the mixing card. Stir with the spatula for 2-4 minutes until it forms a uniform, streak-free grey paste.
- Fill & Shape: Apply the paste directly into the damaged cavity, slightly overfilling the gouge to allow for sanding. Allow to dry for 15 minutes.
- Sand Flush: Wet-sand the cured filler with fine-grit sandpaper until the contour is completely flush and smooth with the original wheel contour.
- Paint & Finish: Wipe away sanding residue. Apply a thin, even coat of the metallic silver lacquer using the fine detail brush. Allow 1-2 hours before driving, with full hardening achieved after 72 hours.