Novol 34212 Antigravel MS - White (500ml)
Keep your light-colored vehicle protected and looking sharp with the Novol 34212 Antigravel MS. This 500ml aerosol is a high-performance, synthetic resin-based protective coating in White. It is specifically designed to guard sills, spoilers, and wheel arches against the relentless "sandblasting" effect of road gravel and stones.
This "MS" (Medium Solid) formula provides a tough, flexible shield that remains elastic over time, preventing cracks and peeling even in extreme temperature fluctuations.
Key Features & Benefits
- Strong Mechanical Shield: Forms a thick, rubberized layer that absorbs stone impacts to prevent chips from reaching the bare metal.
- Corrosion & Salt Resistance: Creates a watertight seal that protects against road salt, moisture, and automotive fluids - essential for winter durability.
- Sound Dampening: Reduces "road roar" and cabin vibration by insulating the metal panels of the underbody and wheel wells.
- Overpaintable: Unlike messy bitumen or wax-based underseals, this resin-based coating can be overpainted with any acrylic topcoat once dry.
- White Finish: The white color is ideal for light-colored cars, as it serves as a bright base that requires significantly less topcoat to achieve full color-match opacity.
- Professional FAN Nozzle: Features an adjustable nozzle that delivers a flat spray pattern, giving you much better control over the texture and coverage than standard round-tip aerosols.
Professional Application Strategy
The Novol Antigravel MS is famous for its "adjustable" texture. You can create anything from a fine, smooth grain to a heavy "orange peel" finish depending on your technique.
Steps for Success:
- Preparation: Clean the area thoroughly with Novol Plus 780. If applying to bare metal, always apply an anti-corrosive primer (like Novol Zinc or Epoxy) first.
- Agitation: Shake the can for 2 full minutes. This is vital to ensure the resins and white pigments are perfectly blended.
- Application: Spray from a distance of 20–25 cm. Apply 2 thin layers rather than one heavy one to avoid runs.
- Nozzle Care: After spraying, turn the can upside down and spray for 5 seconds to clear the valve.
Pro Tip: If you want a smoother texture, hold the can closer and move faster. For a coarser, more rugged look, increase the spray distance and apply light "misting" passes.
