The wrench is made of chrome vanadium steel, which ensures its durability and strength It has a mechanical tension of the torque pawl, whichora after reaching the desired tightening force jumps one tooth, making a characteristic sound The torqueos scale is located in the handle of the wrench, its adjustment is made by turning it After setting the desired torque, lock the wrench with the safety catch at the end of the handle The wrench is GS certified Summary of torqueoin different units of length and force:1 k G*cm = 13. 887 OZ*IN (ounce x inch)1 k G*cm = 0. 867 LB*IN (pound x inch)1 k G*m = 9. 80665 N*m (Niuton x meter)1 k G*m = 7. 233 LB*FT (pound x foot)1 FT*LB = 12 LB*IN (pound x inch)1 dm*N = 14, 16 OZ*IN (ounce x inch) This is mainly used in automotive engineering for precision fastening and wherever the manufacturer has specified the required tightening torque for a joint. - Select the appropriate Nm or in-lbs scale Unlock the micrometer knob. - Holding the unlocked micrometer knob, rotate the wrench handle so that the "0" on the knob scale coincides with the vertical line on the wrench arm. - Turn the wrench handle clockwise until the desired torque is set The desired torque is set when the graduation on the micrometer knob coincides with the vertical line on the wrench arm. - Then lock the micrometer knob, making sure that the lock has "snapped" and it is impossible to rotate the handle, then set the appropriate direction of rotation of the ratchet, after that the wrench is ready for use. - On the taker of the wrench should be applied to the appropriate socket During tightening, the achievement of the set torque is indicated by a click of the wrench If you hear or feel a click, stop tightening. - torque wrench - factory Calibration Certificate (Individual for each wrench, marked with the serial number of the wrench) - instruction manual - warranty card - carrying case.
