Guide, template for drilling in ceramic tiles Body made of damage-resistant plastic Equipped with a strong rubber suction cup with a diameter of about 100 mm, thickness of about 15 mm On the perimeter it has guide holes, reinforced with metal rings fi 4 /5/6/7/8/10/12 mm The set also includes row special tubular drill bits with diamond surfaced tip /with diamond coating/. • Length of drill bits - 55 mm. • Working diameters are adapted to the holesos guide, i e. 4/6/8/10/12 mm. • Bore depth approx. 3 - 4 mm• Shank diameter: 3 to 6 mm Diamond drill bits are designed for drilling „dry or wet” in ceramic tiles, stone, marble, plastics The guide allows you to independently make precise holes in ceramic tiles, stone, glass, many plastics Suction cup allows you to effectively fix on vertical or horizontal elements Place the guide on the tile so that the rubber suction cup on the bottom adheres to the material, slightly press and pull back the lever located on the body Insert a diamond drill bit of similar diameter into the hole of the selected diameter and start drilling Diamond drill bits drill "dry" or with water Do not use the impact function guide, diamond drill bits 4/6/8/12 mm
