Novol Plus 700 - 1k Adhesion Promoter / Plastic Primer, 500ml

€23.99

Item code: 3304725

Delivery Only
In stock
Dispatch: TOMORROW

This item is excluded from any promo codes and offers.

Specifications

Application:

Adhesion increasing agent

Pack Size::

500ml

OE Number

N39091

N39091

Overview

Novol Plus 700 - 1K Adhesion Promoter / Plastic Primer, 500ml

Novol 39091 Plus 700 - 1K Adhesion Promoter (500ml)

Bridge the gap between smooth plastic and high-quality paint with Novol Plus 700. This 500ml aerosol is a specialized one-component (1K) primer designed to solve the most common problem in automotive refinishing: paint peeling off plastic.

Plus 700 acts as a chemical "tie-coat," biting into the surface of difficult automotive plastics and providing a receptive anchor for subsequent layers of primer, basecoat, or structured topcoats.

Key Features & Benefits

Universal Plastic Adhesion: Specifically formulated for "difficult" plastics, including Polypropylene (PP) and its mixtures (like PP/EPDM), which are notoriously resistant to standard paints.
Broad Compatibility: Effectively bonds to most common automotive plastics (except PE - Polyethylene).
Ready-to-Use Aerosol: Eliminates the need for mixing or cleaning spray equipment for small-to-medium trim parts.
Transparent Film: Dries to a very thin, nearly invisible layer that doesn't fill in factory grain or textures.
Rapid Processing: Extremely fast drying time allows you to move to the next painting stage in just minutes.
Enhanced Durability: By ensuring a molecular bond, it prevents the topcoat from flaking due to stone chips, pressure washing, or thermal expansion.

Professional Application Strategy

Plastic preparation is 90% of the job. Follow these steps to ensure the paint stays on forever:

Heat Treatment (Optional but Recommended): For new, unprimed plastic parts, briefly "sweat" the part in a spray booth or with a heat gun (carefully) to release internal molding oils, then degrease again.
Scuffing: Lightly abrade the surface using a Grey Abrasive Pad (Ultra Fine) to create a mechanical key without leaving deep scratches.
Deep Clean: Clean the surface thoroughly with Novol Plus 780 Silicone Remover. This is the most critical step.
Application: Shake the can for 2 minutes. Apply one or two very thin layers. Do not over-apply; a heavy wet coat can actually reduce adhesion.
Timing: Wait 5 to 10 minutes (until the surface is "tack-free") before applying your next layer of acrylic primer or topcoat.

Expert Insight: Plus 700 is a "bridge." It is not a high-build filler. If your plastic part has scratches or gouges, apply Plus 700 first, wait 10 minutes, then apply a high-build primer like Novol Ultra Fuller 100 mixed with Plus 770 Elasticity Agent to fill the imperfections.

Incorrect or missing product information? Let us know

Hazards & Warnings

Causes skin irritation. May cause an allergic skin reaction. Causes serious eye damage. Use PPE, handle with care and keep out of reach of children and pets.

Safety and Product Information

Safety Info and Contacts