Menzerna Super Finish PO106FA as it was previously called is a high gloss swirl remover brings about a new era in polish perfection.
By using a powder fine abrasive, the polish will see off fine swirls and defects and leave you with the most reflective and glossy surface imaginable. Menzerna claim that the abrasives are the smallest and most uniform in the world, these particles have a sharp edge that can cut ceramic clear coats as well as the more conventional clear coats. This means that you get the most stunning shine and gloss imaginable, whilst still being able to remove light imperfections.
Menzerna Super Finish was developed to tackle fine surface scratches in the Maybach and Rolls Royce Phantom and other cerami-coat finishes. It is however becoming widly adopted as the new standard in finishing polishes.
Menzerna Super Finish 3500 will leave your paint with a mirror shine!
Technical Specification:
-Cut: 3/10
-Gloss:10/10
-Water based
-Suitable for use with DA, rotary or by hand
-Suitable for all types of paint finish
-Contains diminishing abrasive particles
-Free of silicones and fillers
Directions for use:
-Ensure surface is clean, dry & cool to the touch
-Apply 2-3 pea sized amounts to a medium/light polishing pad
-Place pad against paintwork & work at low speeds to spread compound
-Work abrasives at medium speed (4-5 with a DA, 2-3 with a rotary)
-Wipe residue with soft microfibre towel
-Finish can be checked using Menzerna Control Cleaner to remove all residue is removed
