Prestone Antifreeze - Coolant Ready To Use - 4 Litre

Slide to view all the 2 images

%OFF

€19.99

Was €24.99 inc.Vat

Item code: 1458129

Sign-Up Discount!
Delivery Only
In stock
Dispatch: TODAY

Shipping Cost

Specifications

Fitment:

Suitable For ALL Makes & Models

Pack Size::

4 Litres

Additional Info:

Ready to use!

OE Number

PAFR0038B

PAFR0038B

Overview

Prestone Antifreeze and Coolant - Ready To Use - 4 Litre
Universal - Suits All Car Models

Prestone Coolant/Antifreeze Ready to Use (4 Litre) delivers pre-diluted engine cooling and freeze protection for complete cooling system refills, flushes, or major fluid services. Pre-mixed to an exact 50/50 ratio with laboratory-grade demineralized water, this 4-litre jug requires no measuring or dilution, eliminating scale formation caused by hard tap water. Powered by Prestone’s patented Cor-Guard technology, it is universally compatible with all vehicle makes, all models, and mixes safely with any existing coolant color without gelling or degrading internal seals. It provides long-lasting protection against freezing down to -37°C, boil-over up to +129°C, and shields all cooling system metals for up to 10 years or 300,000 miles (480,000 km).

Key Features & Benefits

Pre-Mixed 50/50 Solution: Factory-blended with demineralized water; pour directly into the system with no measuring, water mixing, or guesswork.
Guaranteed All Makes & Models: Engineered for all petrol, diesel, and hybrid engines across passenger cars, SUVs, vans, and light commercial vehicles.
Mixes with Any Coolant Color: Can be added to any existing factory or aftermarket fluid (blue, red, pink, green, orange, or yellow) without clogging passages or voiding manufacturer warranties.
Patented Cor-Guard Technology: Outperforms standard specifications by offering 5x greater corrosion protection across aluminum cylinder heads, cast iron blocks, copper radiators, water pumps, and solder joints.
Long-Life Engine Defense: Delivers extended service intervals of up to 10 years or 300,000 miles (480,000 km) when completing a full system flush and refill.
Extreme Weather Performance: Prevents winter freeze-ups down to -37°C (-34°F) and summer boil-overs up to +129°C (+265°F) with a standard 15 psi pressure cap.
Ideal 4-Litre Refill Size: The standard capacity needed to fully recharge passenger vehicle cooling systems or perform substantial service flushes.

Application Instructions (Full System Drain & Refill)

Ensure Engine is Cold: Switch off the vehicle and verify the cooling system is completely cold before removing any caps.
Drain Old Fluid: Open the radiator petcock drain valve or detach the lower radiator hose to drain the depleted coolant into a waste container. For best results, clean the system with Prestone Cooling System Flush prior to refilling.
Pour Directly (Do Not Add Water): Close the drain valve securely. Pour Prestone Coolant directly into the radiator or coolant expansion tank until it reaches the MAX cold fill line.
Purge Air Pockets: Set vehicle climate controls to maximum cabin heat. Start the engine and allow it to idle until the thermostat opens, allowing the coolant to circulate through the heater core and purge trapped air locks.
Inspect & Cap: Turn off the engine, allow it to cool, check the reservoir level, add remaining fluid up to the MAX fill line if necessary, and tightly secure the pressure cap.

Incorrect or missing product information? Let us know

Hazards & Warnings

Causes skin irritation. May cause an allergic skin reaction. Causes serious eye damage. Use PPE, handle with care and keep out of reach of children and pets.