Question 1

Buying & Fitting Guide

Accepted Answer

A manifold gasket is a sheet of material designed as an exact fit to be installed between two mating surfaces of either the intake or exhaust manifold and engine block to create a static seal, which will maintain the leakage proof sealing in all operating conditions. To ensure that you get the correct gasket, it is best to check the size and shape of the one currently installed so you can compare with the listed gaskets. Some important information for selecting the correct part is the type of gasket design needed (composite or metal), thickness, number of holes/ notches, bore diameter and date limitation of the unit. As car manufacturers regularly update certain peripherals and design of their models, some head gaskets will only be suitable for particular models of certain years. Note: It is always a good idea to replace manifold bolts with new ones when replacing the gasket to reduce the risk of premature failure.

Question 2

Useful Fitting Accessories & Tools

Accepted Answer

Click on the links below to find useful fitting accessories and tools:

Torches and Work Lights
Torque Angle Guage
Mechanic's Toolkit
Jacks and Axle Stands
Disposable Gloves and Hand Care
Screwdrivers
Plier Sets
Cleaning
Drain Pans and Funnels
Coolant

Question 3

Helpful Tips

Accepted Answer

An exhaust-manifold gasket is more likely to need renewing than the gasket on the intake manifold, because of the greater damage caused to the exhaust system by heat; but the procedure is much the same for both. A 'blown' exhaust gasket can be detected by excessive noise from the exhaust, and by white burn marks around the manifold flange. Replacing manifold gaskets can be performed at home with a few simple tools. Before removing either manifolds, apply penetrating oil to all nuts or bolts which must be undone. When the nuts or bolts are removed, the remains of the old gasket may cause the manifold to stick: tap the manifold with a rawhide hammer to loosen it. If any manifold studs are broken or damaged, remove them using self-locking grips, two nuts and a spanner, or stud remover. After reassembly, run the engine to working temperature, switch it off and check the torque settings.

Question 4

Elring Intake & Exhaust Manifold Gaskets

Accepted Answer

Elring – the complete supplier. For professional repairs, place your trust in genuine gaskets, gasket sets and service parts from Elring – the reliable and experienced supplier of spare parts to original equipment standards. The entire Elring range of spare parts for passenger cars and commercial vehicles is designed to meet the requirements of the market. Supplying genuine brand name quality for all purposes, whether for overhauling an engine or working on cylinder-heads and crankshaft drives. Their international organisation ensures the rapid availability of the Elring range.

Elring Intake Manifold Gasket - 467251

€3.99

Item code: 219433

Delivery Only

In stock

Dispatch: THURSDAY

OE Numbers Open

Overview

Elring Reinz Exhaust Manifold Gasket

Buying & Fitting Guide

Useful Fitting Accessories & Tools

Helpful Tips

Elring Intake & Exhaust Manifold Gaskets

Safety and Product Information