Multifunctional sharpener 150 w, 5500 rpm, for sharpening drills 3-13 mm Multifunctional sharpener 150 W for sharpening steel drills 3 mm -13 mm, knives, axe scissors and cleavers Purpose/application: • sharpening of drills intended for drilling in metal or universal drills • sharpening of knives • sharpening of scissors • sharpening of axes and cleavers provided that all the aforementioned products are made of steel Technical data: • network voltage: 230 V • network frequency: 50 Hz • rated power: 150 W • rated speed: 5500 min-1 • drill diameter: 3 mm -13 mm • drill tip angle: 118 degrees • insulation class: II • protection rating: IP 20 • noise level: - sound pressure Lp A ± Kp A - 81. 56 ± 3 d B (A) - sound power Lw A ± Kw A - 94. 56 ± 3 d B (A) • Weight: 1. 62 kg How to use Before starting work, place the sharpener on a level, flat and hard surface Make sure that all the feet of the tool rest on the ground Use the sharpener only in a dry area, without the possibility of access of bystanders, especially children Sharpening of axes, knives, scissors: • sharpening of axes knives and scissors should be carried out with protective gloves, protecting against cuts • select the slot intended for sharpening a particular type of blade • switch on the sharpener and wait until the nominal speed is reached. • insert the blade into the appropriate slot and then pull it in the direction opposite to the direction of rotation of the grinding plate, marked on the sharpener housing • while pulling, the blade should be pressed against the grinding plate with a slight force Repeat the operation several times.
Track