FIBER glass fibre reinforced putty.
Thanks to a large quantity of long fibres the product has a very high mechanical strength and good filling properties. Its low flexibility and hard sanding limits its application to small surfaces.
Application directions
-Clean and sand the surface
-Degrease the surface with PLUS 780
-Observe the required amount of hardener. Mix the components thoroughly until a uniform colour is obtained. Weigh quantity of components: Add 100g of FIBRE to 2-3g of Hardener. Binding time: 4-6 minutes at 20*C
-Apply a layer of 5mm max with a putty knife
-Wait for 20-30 minutes (at 20*C)
-Rough sand with P80-P120